| Quantity: | |
|---|---|
Z-TJ22-NP
SEDULOUS
The Z-TJ22-NP is an adjustable furniture and equipment leg developed for commercial kitchen installations where stable positioning, height correction, and floor clearance are important.
Its adjustable structure allows the installed height to be fine-tuned after a cabinet, workbench, counter, or food service unit has been placed in position. This gives equipment manufacturers and installers greater flexibility when dealing with uneven floors or aligning several adjacent units.
Manufactured from Zamak with a nickel-plated finish, the leg also provides a clean metallic appearance suitable for visible hardware on professional kitchen furniture and equipment.
Zamak is commonly used in precision hardware components because it can be formed into consistent shapes suitable for repeated production.
For commercial kitchen equipment manufacturers, this makes it a practical material for adjustable legs that need to be produced in volume with controlled dimensions and appearance.
The nickel-plated surface adds a finished metallic appearance and provides an additional surface layer over the Zamak body.
Its neutral silver-toned finish can coordinate with:
Stainless steel kitchen cabinets
Commercial preparation tables
Catering counters
Food service equipment
Restaurant storage units
Metal kitchen furniture
This makes the Z-TJ22-NP particularly suitable where the supporting leg remains partially visible after installation.
Commercial kitchens rarely have perfectly uniform flooring. Drainage slopes, tiled surfaces, and minor floor variations can cause cabinets or equipment to sit unevenly.
An adjustable leg allows installers to correct these differences during final installation.
By adjusting individual support points, installers can improve:
Equipment leveling
Cabinet alignment
Working-height consistency
Contact stability with the floor
Positioning between adjacent equipment
Overall installation flexibility
This adjustment function is especially useful when several cabinets, worktables, or food service units must be installed as one continuous equipment line.
Commercial kitchen equipment frequently requires separation between the equipment body and the floor.
Installing the unit on adjustable legs creates clearance underneath the cabinet or equipment base rather than allowing the main structure to sit directly on the flooring.
This clearance can provide practical advantages during installation and daily use, including:
Easier access beneath equipment
Reduced direct contact between cabinet bodies and floor moisture
More convenient floor cleaning
Space for inspection around the equipment base
Easier height alignment during installation
For food service equipment manufacturers, the adjustable leg therefore performs both a supporting and installation-related function.
The Z-TJ22-NP can be considered for different types of commercial kitchen furniture and food service equipment where compatible mounting and support requirements are present.
Typical applications include:
Suitable for base cabinets and storage units that require adjustable floor support and consistent alignment during installation.
Adjustable support can help worktables maintain a more consistent working position when installed on floors with minor variations.
The leg can be integrated into compatible preparation stations, counters, and related food service equipment.
It can also be considered for buffet units, storage furniture, service counters, and other commercial catering installations.
For manufacturers producing their own commercial kitchen equipment, the leg can be incorporated as a supporting hardware component within a larger equipment assembly.
Item | Details |
|---|---|
Product Type | Adjustable Furniture / Equipment Leg |
Model | Z-TJ22-NP |
Brand | SEDULOUS |
Material | Zamak |
Finish | Nickel Plated |
Design Style | European |
Main Application | Commercial Kitchen Equipment |
Sample | Available |
OEM Service | Available |
MOQ | 500 Pieces |
Supply Ability | 100,000 Pieces per Month |
Shipping Port | Ningbo / Shanghai |
The adjustable mechanism allows final leveling to be carried out after the equipment reaches the installation site.
This can reduce the difficulty of aligning multiple cabinets or equipment units on flooring that is not completely level.
The nickel-plated finish gives the leg a finished appearance, making it suitable for applications where part of the support structure remains visible.
With OEM support, sample availability, and stated monthly production capacity, the Z-TJ22-NP can be considered for recurring equipment production rather than only one-off replacement applications.
The product can be evaluated for cabinets, workbenches, service counters, preparation equipment, and other commercial kitchen assemblies according to the required installation structure.
For OEM and volume sourcing projects, selecting an adjustable leg should involve more than appearance alone.
Before confirming an order, buyers should review the following points.
Confirm how the leg connects to the cabinet or equipment frame and whether the mounting structure matches the equipment design.
Determine the target equipment height and the amount of adjustment required after installation.
The cabinet or equipment base should provide a suitable connection point for the adjustable leg.
For exposed hardware, confirm whether nickel plating matches the surrounding stainless steel, zinc alloy, or other metal components.
Consider the actual operating environment, including floor conditions, cleaning procedures, equipment layout, and frequency of use.
For new OEM projects, sample evaluation is recommended before volume purchasing so the buyer can verify appearance, installation compatibility, and fit with the equipment structure.
The Z-TJ22-NP is available for OEM purchasing and volume supply.
For kitchen equipment manufacturers, distributors, and hardware sourcing companies, OEM cooperation can support integration of the adjustable leg into ongoing product programs.
Depending on project requirements, buyers can communicate with Tongyi Metalwork regarding:
Product quantities
Packaging requirements
OEM programs
Surface treatment requirements
Hardware specifications
Production scheduling
Shipping arrangements
Sample orders are available for preliminary evaluation before mass production.
The current purchasing information provides different production lead times according to order quantity:
500 sets: approximately 25 days
501–1,000 sets: approximately 30 days
Above 1,000 sets: lead time to be negotiated
The stated minimum order quantity is 500 pieces, with a monthly supply capability of up to 100,000 pieces.
Shipping can be arranged through Ningbo or Shanghai ports.
Fixed equipment feet provide a predetermined installation height, while adjustable legs allow installers to make corrections after equipment is placed on site.
This can be important in commercial kitchens because flooring conditions vary considerably between restaurants, hotels, catering facilities, institutional kitchens, and food preparation areas.
Adjustability gives manufacturers and installers greater flexibility when they need to:
Level equipment after placement
Align several cabinets together
Maintain a consistent working surface
Create clearance below the equipment
Adapt installation to minor floor variations
For this reason, adjustable legs are commonly treated as functional components of the complete equipment system rather than simply decorative furniture accessories.
The Z-TJ22-NP is manufactured from Zamak and uses a nickel-plated surface finish.
It is intended primarily for commercial kitchen cabinets, food service equipment, worktables, service units, and related kitchen furniture with compatible mounting structures.
Height adjustment allows installers to compensate for minor floor variations and align cabinets or equipment after they have been positioned.
The nickel-plated finish provides a clean metallic appearance that coordinates well with stainless steel and other metal components commonly used in commercial kitchens.
Yes. OEM service is available for customers sourcing adjustable legs for commercial kitchen equipment manufacturing and related hardware programs.
Yes. Samples are available and can be used to evaluate appearance and installation compatibility before a larger production order.
The stated minimum order quantity is 500 pieces.
It is useful to provide the intended equipment application, required quantity, installation requirements, preferred finish, packaging needs, and any relevant drawings or specifications so the manufacturer can evaluate the project.
